Hanno®-Folienband DUO Easy Pads
The HANNO product world
Product description
Hanno®-DUO Easy Pads consists of a modified polyamide film/fleece combination. The four-layer plaster has a variable sd value. The full-surface, aggressively self-adhesive underside enables very simple, completely concealed installation of the flashing tapees, which can be plastered and painted over, without additional bonding to the masonry.
Product properties
- Airtight
- Moisture variable sd value
- Universally suitable for renovation and new build
- Can be processed at low temperatures
- Can be plastered or painted over
- Stretchable
Application areas
- Hanno®-DUO Easy Pads are suitable for masking fasteners (angles, slings, anchors, etc.) for both internal and external sealing.
Processing
It must be ensured that there is no separating film on the surface to be bonded, e.g. due to moisture, grease or dirt etc., which prevents the adhesive from coming into contact with the surface. surface. Adhesion to the respective substrate must be ensured by carrying out your own tests. The substrate must have sufficient load-bearing capacity and provide an provide a sufficient adhesive base. A spray primer can be used for highly absorbent substrates and to support adhesion on cold damp surfaces. can be used. We recommend the spray adhesive Fast drying from Bowcraft. Hanno®-DUO Easy Pads can also be used at low temperatures down to -10 °C. It must be ensured that there is no separating film on the surface to be bonded, e.g. due to moisture, ice or hoar frost etc., preventing adhesive contact with the surface. The full adhesive strength is achieved after thawing to > 0 °C. Low temperatures can reduce adhesion. The dwell time, during which the bond cannot be loaded, is extended accordingly. extended accordingly. Sufficient adhesion should be ensured by carrying out your own tests before further processing. It is recommended to preheat the flashing tape at low temperatures to +15 °C to +25 °C before processing. Any gaps can be glued with Hanno®-3E Foil Adhesive MS, for example. Ensure sufficient fabric reinforcement of the plaster in the reveal area. Use together with → Hanno®-flashing tape DUO Easy 240.
Cleaning
- Skin cleaning with soap and water. Impregnate and/or adhesive residues can be removed with a petrol-based cleaning agent. Please observe the safety instructions.
Notes
Additional information is also available in the brochure "Plastering window connection foils", from the Bundesverband der Gipsindustrie e.V. - Industriegruppe Baugipse.
Download area
| Data sheet "Hanno®-Folienband DUO Easy Pads" | ||
|---|---|---|
| German version | 2 MB | |
| Certificates "Hanno®-Folienband DUO Easy Pads" | ||
Environment
- Based on available data and experience, the product is not a hazardous substance within the meaning of the Hazardous Substances Ordinance and corresponding EC directives. However, we recommend observing the usual care and hygiene when handling chemical substances. Residues can be disposed of with household waste. Local regulations must be observed.
| Property | Standard | Value |
|---|---|---|
| Fiber/film composition | - | Kombination aus PES-Vlies und PA-Folie |
| Grammage | DIN EN 1849 | ca. 350 g/m² |
| Thickness | DIN EN 1849 | ca. 0,55 mm |
| Air permeability | DIN EN 12114 | a_{n} < 0,1 m³/ (h m dPa⅔), MPA* |
| Driving rain tightness | DIN EN 1027 | ≥ 1050 Pa, MPA* |
| Resistance to water penetration |
DIN EN 1928 DIN EN 13984 |
Folie: W1 Folie: W1 |
| Water vapor diffusion | DIN EN ISO 12572 | 0,48 m ≤ sd ≤ 12,0 m (feuchtevariabel), MPA* |
| Fire behavior | DIN EN 13501 | Klasse E, MPA* |
| Emissionen | EMICODE® | EC1Plus, GEV** |
| Plasterability | - | Gegeben, MPA* |
| UV & weather resistance | - | 12 Monate *** |
| Temperature resistance | - | -40 °C bis +80 °C |
| Processing temperature | - | +5 °C bis +40 °C. Bis -10 °C einsetzbar (siehe Verarbeitung) |
| Storage stability | - | 24 Monate, trocken, bei Raumtemperatur, im Originalgebinde |
| Footnote_(*) | - | * Materialprüfanstalt für das Bauwesen Hannover |
| Footnote_(**) | - | ** Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V. |
| Footnote_(***) | - | *** Mitteleuropäisches gemäßigtes Klima |