Hanno®-Folienband FI Easy 240
The HANNO product world
Product description
Hanno®-flashing tape FI Easy 240 consists of a diffusion-inhibiting, airtight fleece-membrane combination. The full-surface, aggressively self-adhesive underside enables very simple, completely concealed installation of the flashing tape, which can be plastered and painted over, without additional bonding to the masonry. A version with an additional self-adhesive strip on the top is also available. top side is also available.
Product properties
- ift-certified
- Universally suitable for renovation and new build
- High initial adhesion (secure processing)
- Can be plastered or painted over
- Can be processed at low temperatures
Application areas
- Sealing (internal sealing)
Processing
It must be ensured that there is no separating film on the surface to be bonded, e.g. due to moisture, grease or dirt etc., which prevents the adhesive from coming into contact with the surface. surface. Adhesion to the respective substrate must be ensured by carrying out your own tests. The substrate must have sufficient load-bearing capacity and provide an provide a sufficient adhesive base. A spray primer can be used on highly absorbent substrates and to support adhesion on cold damp surfaces. can be used. We recommend the spray adhesive Fast drying from Bowcraft. Hanno® flashing tape FI Easy 240 can also be used at low temperatures down to -10 °C. It must be ensured that there is no separating film on the surface to be bonded, e.g. due to moisture, ice or hoar frost etc., preventing adhesive contact with the surface. The full adhesive strength is achieved after thawing to > 0 °C. The additional adhesive strip of the Hanno®-Folien- tape FI Easy+ 240 can be processed at ≥ +5 °C. Lower temperatures can reduce adhesion. The The dwell time, during which the bond cannot be loaded, is extended accordingly. Sufficient adhesion should be ensured by carrying out your own tests before further processing. It is recommended to preheat flashing tape to +15 °C to +25 °C at low temperatures before processing. +15 °C to +25 °C before processing. Unroll Hanno®-flashing tape FI Easy 240 and cut to length with approx. 5 cm excess length. Remove the cover film and carefully press the fixing strip onto the back of the window. Repeat this process on all sides of the window to be sealed. Then align and fix the window element, remove the remaining masking film, stick it to the masonry and press down firmly over the entire surface. No additional adhesive is required for bonding to the masonry substrate. Glue overlapping joints. The installation instructions enclosed with the product must be must be observed. Any gaps can be glued with Hanno®-3E Foil Adhesive MS, for example. Fill the cavity between the window and wall with insulating material, e.g. Hanno® gun foam. Ensure sufficient fabric reinforcement of the plaster in the reveal area. For external sealing against driving rain, we recommend → Hanno®-flashing tape FA-D or → Hanno®-flashing tape FA Easy 240.
Cleaning
- Skin cleaning with soap and water. Impregnate and/or adhesive residues can be removed with a petrol-based cleaning agent. Please observe the safety instructions.
Delivery form
- Roll goods
- Also available with an additional self-adhesive strip (+) on the top as a mounting aid -> Hanno®-flashing tape FI Easy+ 240.
Notes
Additional information is also available in the brochure "Plastering window connection foils", from the Bundesverband der Gipsindustrie e.V. - Industriegruppe Baugipse.
Download area
| Data sheet "Hanno®-Folienband FI Easy 240" | ||
|---|---|---|
| German version | 1 MB | |
| English version | 880 KB | |
| Certificates "Hanno®-Folienband FI Easy 240" | ||
Environment
- Based on available data and experience, the product is not a hazardous substance within the meaning of the Hazardous Substances Ordinance and corresponding EC directives. However, we recommend observing the usual care and hygiene when handling chemical substances. Residues can be disposed of with household waste. Local regulations must be observed.
| Property | Standard | Value |
|---|---|---|
| Fiber/film composition | - | Kombination aus PP-Vlies und PP-Folie |
| Glue | - | Acrylathaftkleber 240 g/m² |
| Grammage | DIN EN 1849 | ca. 330 g/m² |
| Thickness | DIN EN 1849 | ca. 0,5 mm |
| Air permeability | DIN EN 1026 | a_{n} < 0,1 m³/(h m dPa⅔), MPA* |
| Driving rain tightness | DIN EN 1027 | ≥ 1050 Pa, MPA* |
| Resistance to water penetration |
DIN EN 1928 DIN EN 13984 |
Folie: W1 Folie: W1 |
| Water vapor diffusion | DIN EN ISO 12572 | sd ≥ 10 m, MPA* |
| Fire behavior | DIN EN 13501 | Klasse E, MPA* |
| Emissionen | EMICODE® | EC1Plus, GEV** |
| Breaking force | DIN EN 12311-2 | Folie: md ≥ 85 N/50 mm / cd ≥ 45 N/50 mm |
| Elongation at break | DIN EN 12311-2 | Folie: md ≥ 60 % / cd ≥ 65 % |
| Plasterability | - | gegeben, MPA* |
| Permissible total deformation | - | Es ist eine Schlaufen-/Bewegungsreserve bei der Montage vorzusehen |
| UV & weather resistance | - | 3 Monate *** |
| Temperature resistance | - | -40 °C bis + 80 °C |
| Processing temperature | - | +5 °C bis +40 °C. Bis -10 °C einsetzbar (siehe Verarbeitung) |
| Storage stability | - | 24 Monate, trocken, bei Raumtemperatur, im Originalgebinde |
| Footnote_(*) | - | * Materialprüfanstalt für das Bauwesen, Hannover |
| Footnote_(**) | - | ** Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V. |
| Footnote_(***) | - | *** Mitteleuropäisches gemäßigtes Klima |
The assembly
Product videos
"Assembly instructions German Hanno®-Folienband FI Easy 240"
"Assembly instructions English Hanno®-Folienband FI Easy 240"