Hanno®-PE 25 N FR
The HANNO product world
Product description
Hanno®-PE 25 N FR is a closed-cell, coarse-cell and non-crosslinked polyethylene foam for applications in damp and wet areas.
Product properties
- Hydrolysis-resistant
- Weather resistant
- Excellent sound absorption capacity
- High strength
Application areas
- Damp and wet areas
- Commercial vehicles
- Rail vehicle
- Capsule construction
- Mechanical engineering
- Refrigeration technology
Processing
Bonding only on dry, grease-free, clean substrates. Press the surface down well. You can easily adjust the material and cut it to size with a sharp knife.
Cleaning
- No significant soiling from the material is to be expected. In the case of self-adhesive parts, adhesive residues can be removed with a petrol-based cleaning agent if necessary. The safety instructions for the cleaning agent used must be observed.
Delivery form
- Sheet goods
- Cuts
- Punched parts (dimensions on request)
- Can be equipped with self-adhesive
Notes
The material tends to change dimensions during processing (punching, cutting, pressing, winding, installation, etc.). In general, the dimensional tolerances of DIN 7715-P3 can be adhered to. For special dimensional accuracy requirements, please contact our customer service department.
Download area
| Data sheet "Hanno®-PE 25 N FR" | ||
|---|---|---|
| German version | 648 KB | |
| English version | 650 KB | |
| Certificates "Hanno®-PE 25 N FR" | ||
Environment
- Based on available data and experience, the product is not a hazardous substance within the meaning of the Hazardous Substances Ordinance and corresponding EC directives. However, we recommend observing the usual care and hygiene when handling chemical substances. Residues can be disposed of with household waste. Local regulations must be observed.
- The product complies with the following directives or fulfills the required restrictions on use: 1907/2006 (REACH), 2011/65 (RoHs2), 2015/863 (RoHs3), 2019/1021 (POP), 517/2014 (greenhouse gases), 2024/590 (depletion of the ozone layer).
| Property | Standard | Value |
|---|---|---|
| Color | - | anthrazit |
| Raw density | DIN EN ISO 845 | ca. 25 kg/m³ |
| Compression hardness |
DIN EN ISO 3386 DIN EN ISO 7214 DIN EN ISO 3386 DIN EN ISO 7214 |
ca. 3 kPa (bei 25 %) ca. 12 kPa (bei 50 %) ca. 7 kPa (bei 50 %) ca. 7 kPa (bei 25 %) |
| Compression set | DIN EN ISO 1856 | < 20 % (25 %) |
| Cell size | - | < 10 / 25 mm |
| Water absorption | DIN EN 12088 | < 5 % (> 95 % rF, 28 d) |
| Fire behavior |
DIN 75200 FMVSS 302 DIN CEN/TS 45545-2 DIN 54837 DIN 4102 DIN EN 13501 |
≤ 100 mm/min NULL HL2 S3, SR2, ST2 B1 B-s2-d0 |
| Temperature resistance | - | -30 °C bis +80 °C |