Hannoband®-BSB BG1
The HANNO product world
Product description
Hannoband®-BSB BG1 is a joint sealing tape with an acrylate dispersion impregnation specially acrylate dispersion impregnation specially formulated for fire protection, additives and fillers.
Product properties
- stress group BG1 - DIN 18542
- Building material class B1 - DIN 4102
- Fire resistance duration up to EI 120 min. (DIN EN 1366-4 - double laid on masonry)
- Fire resistance duration up to EI 60 min. (DIN EN 1366-4 - double laid between masonry and timber frame)
- Weather-independent installation
- Very low emissions - EMICODE®-EC1Plus
Application areas
- Fire resistance safety of the joint
- stress group BG1
Processing
Please follow the assembly instructions
Cleaning
- Skin cleaning with soap and water. Impregnate and/or adhesive residues can be removed with a petrol-based cleaning agent. Please observe the safety instructions.
Delivery form
- Pre-compressed on rolls
System check
Information on possible system tests is available at info@hanno.com or directly from our application technology department.
Limitations of liability
- Our General Terms and Conditions of Sale with warranty conditions apply, which you can view at www.hanno.com . This information sheet provides non-binding advice without guarantee. The processing instructions given must be adapted to the respective conditions. The user is obliged to check the suitability and application possibilities by carrying out his own tests in order to avoid failures, for which we accept no liability. We reserve the right to make technical changes.
- You can request the latest version of this information sheet at info@hanno.com.
Download area
| Data sheet "Hannoband®-BSB BG1" | ||
|---|---|---|
| German version | 2 MB | |
| English version | 919 KB | |
| Certificates "Hannoband®-BSB BG1" | ||
| Property | Standard | Value |
|---|---|---|
| Color | - | hellgrau |
| Fire behavior | DIN 4102-1 | B1, DIBt* fremdüberwacht durch MPA** |
| Fire resistance duration |
DIN EN 1366-4 DIN EN 1363-1 DIN EN 1363-2 |
Bis EI60, bzw. EI120 je nach Fugentiefe und Einbau bei zweilagigem Einbau, ift*** Bis EI20 bei einlagigem Einbau, ift*** Ein Fugentiefen- zu Fugenbreitenverhältnis von >1,5 wird empfohlen |
| Joint permeability coefficient | DIN EN 12114 | a_{n} < 1 m³/ (h m dPa⅔), MPA** |
| Driving rain tightness | DIN EN 1027 | ≥600 Pa, MPA** |
| Thermal conductivity | DIN EN 12667 | λ = 0,0429 W/mK, MPA** |
| Processing temperature | - | +5 °C bis +45 °C |
| Temperature resistance | - | -30 °C bis +100 °C, kurzzeitig bis +130 °C |
| Emissionen | EMICODE® | EC1Plus, GEV**** |
| Compatibility with adjacent building materials | DIN 18542 | gegeben |
| Storage stability | - | 18 Monate ab Produktionsdatum |
| Footnote_(*) | - | * Deutsches Institut für Bautechnik |
| Footnote_(**) | - | ** Materialprüfanstalt Hannover, Hannover |
| Footnote_(***) | - | *** Institut für Fenstertechnik, Rosenheim |
| Footnote_(****) | - | **** Gemeinschaft Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und Bauprodukte e. V. |
| Dimension | |||
|---|---|---|---|
| Minimal | Maximum | ||
| 15/5-9 | ≥ 15 | 5 | 9 |
| 20/5-9 | ≥ 15 | ||
| 30/5-9 | ≥ 15 | ||
| 15/7-12 | ≥ 20 | 7 | 12 |
| 20/7-12 | ≥ 20 | ||
| 25/7-12 | ≥ 20 | ||
| 30/7-12 | ≥ 20 | ||
| 20/8-15 | ≥ 25 | 8 | 15 |
| 25/8-15 | ≥ 25 | ||
| 30/8-15 | ≥ 25 | ||
| 40/8-15 | ≥ 25 | ||
| 25/10-18 | ≥ 30 | 10 | 18 |
| 30/10-18 | ≥ 30 | ||
| 35/15-25 | ≥ 40 | 15 | 25 |
| 40/15-25 | ≥ 40 | ||