Hanno®-Redusoft DI 150
The HANNO product world
Product description
Flexible polyurethane foam impregnated with modified acrylate dispersion with additives and fillers.
Product properties
- Permanently elastic
- Tolerance-compensating
- Airborne sound-absorbing
- Sealing (sealing effect depends on the degree of compression)
- Breathable
- No emigration of impregnate
- DBL 1250
- VDA 278
Application areas
- Automotive
- Mechanical engineering
- Equipment and apparatus engineering
- Airborne sound insulation
- Draught/dust sealing
Processing
Application-related
Cleaning
- Skin cleaning with soap and water. Impregnate and/or adhesive residues can be removed with a petrol-based cleaning agent. Please observe the safety instructions.
Delivery form
- Punched parts (dimensions on request)
- Cuts
- Can be equipped with self-adhesive
- Pre-compressed on rolls
- Sheet goods
Notes
The material tends to change dimensions during processing (punching, cutting, pressing, winding, installation, etc.). In general, the dimensional tolerances of DIN 7715-P3 can be adhered to. For special dimensional accuracy requirements, please contact our customer service department.
Compressed material in particular shows delayed recovery behavior depending on the storage time and does not expand to its original thickness.
Download area
| Data sheet "Hanno®-Redusoft DI 150" | ||
|---|---|---|
| German version | 686 KB | |
| English version | 698 KB | |
| Certificates "Hanno®-Redusoft DI 150" | ||
Environment
- The product complies with the following directives or fulfills the required restrictions on use: 1907/2006 (REACH), 2011/65 (RoHS2), 2015/863 (RoHS3), 2019/1021 (POP), 517/2014 (greenhouse gases), 2024/590 (depletion of the ozone layer), GADSL.
- Based on available data and experience, the product is not a hazardous substance within the meaning of the Hazardous Substances Ordinance and corresponding EC directives. However, we recommend observing the usual care and hygiene when handling chemical substances. Residues can be disposed of with household waste. Local regulations must be observed.
| Property | Standard | Value |
|---|---|---|
| Color | - | schwarz |
| Raw density | DIN EN ISO 845 | 150 kg/m³ ± 15 % |
| Compression hardness | DIN EN ISO 3386 | 6 kPa ± 15 % (bei 40 %) |
| Tensile strength | DIN EN ISO 1798 | ≥ 100 kPa (160 kPa*) |
| Elongation at break | DIN EN ISO 1798 | ≥ 150 % (167 %*) |
| Compression set | DIN EN ISO 1856 | ≤ 5 % (4,9 %*) |
| Emissionen |
VDA 278 VDA 278 |
VOC ≤ 200 ppm (5 ppm*) FOG ≤ 600 ppm (25 ppm*) |
| Odor | VDA 270 | ≤ 3 (2,7*) |
| Fire behavior |
DIN 75200 FMVSS 302 ISO 3795 TL 1010 DBL 5307 UL 94 DIN EN 13501-1 DIN 4102-1 |
≤ 100 mm/min 0 / SE* V0 & HF** Klasse E B2*** |
| Temperature resistance | - | -40 °C bis +100 °C, kurzzeitig bis 130 °C |
| Footnote_(*) | - | * Messwert |
| Footnote_(**) | - | ** UL94 nur in Anlehnung, keine UL-Listung |
| Footnote_(***) | - | *** interne Prüfung in Anlehnung |
| Automotive |
DBL 1250.06 DBL 1250.07 DBL 1250.08 DBL 1250.09 |
Erfüllt Erfüllt Erfüllt Erfüllt |