Hanno®-Protecto plus 85
The HANNO product world
Product description
Sound insulation element made of a heavy foil layer and PU-skinned absorption layer for demanding noise control. The reverse side is coated with an acrylic adhesive.
Product properties
- Droning
- Excellent sound absorption capacity
- Dirt and splash water repellent
- Easy to clean
- Outstanding ageing resistance
Application areas
- Capsule construction
- Mechanical engineering
- Commercial vehicles
Processing
Bonding only on dry, grease-free, clean substrates. Press the surface down well. You can easily adjust the material and cut it to size with a sharp knife.
Cleaning
- No significant soiling from the material is to be expected. In the case of self-adhesive parts, adhesive residues can be removed with a petrol-based cleaning agent if necessary. The safety instructions for the cleaning agent used must be observed.
Delivery form
- Sheet goods
- Cuts
- Punched parts (dimensions on request)
- Can be equipped with self-adhesive
Notes
The material tends to change dimensions during processing (punching, cutting, pressing, winding, installation, etc.). In general, the dimensional tolerances of DIN 7715-P3 can be adhered to. For special dimensional accuracy requirements, please contact our customer service department.
The product is conditionally suitable for freely suspended or freely weathered applications. Mechanical fixing is also recommended when installed.
Download area
| Data sheet "Hanno®-Protecto plus 85" | ||
|---|---|---|
| German version | 732 KB | |
| English version | 735 KB | |
| Certificates "Hanno®-Protecto plus 85" | ||
Environment
- Based on available data and experience, the product is not a hazardous substance within the meaning of the Hazardous Substances Ordinance and corresponding EC directives. However, we recommend observing the usual care and hygiene when handling chemical substances. Residues can be disposed of with household waste. Local regulations must be observed.
- The product complies with the following directives or fulfills the required restrictions on use: 1907/2006 (REACH), 2011/65 (RoHs2), 2015/863 (RoHs3), 2019/1021 (POP), 517/2014 (greenhouse gases), 2024/590 (depletion of the ozone layer).
| Property | Standard | Value |
|---|---|---|
| Color |
|
Schaum: anthrazit Oberfläche: schwarz |
| Grammage | - | ca. 6kg/m² (dickenabhängig) |
| Fire behavior |
DIN 75200 ISO 3795 FMVSS 302 |
< 100 mm/min |
| Temperature resistance | - | -35 °C bis +80 °C, kurzfristig höher |
| Storage | - | kühl und trocken, 6 Monate* |
| Footnote_(*) | - | * Bitumen kann in den Kleber migrieren |