Hanno®-PE 33 P
The HANNO product world
Product description
Polyethylene foam, closed cell, physically cross-linked.
Product properties
- Hydrolysis-resistant
- Chemical resistance
- Airtight
Application areas
- Capsule construction
- Thermal insulation
Processing
Bonding only on dry, grease-free, clean substrates. Press the surface well. The material is easy to punch and cut. You can easily adjust the material and cut it to size with a sharp knife.
Cleaning
- No significant soiling from the material is to be expected. In the case of self-adhesive parts, adhesive residues can be removed with a petrol-based cleaning agent if necessary. The safety instructions for the cleaning agent used must be observed.
Delivery form
- Sheet goods
- Cuts
- Punched parts (dimensions on request)
- Roll goods
- Can be equipped with self-adhesive
Notes
The material tends to change dimensions during processing (punching, cutting, pressing, winding, installation, etc.). In general, the dimensional tolerances of DIN 7715-P3 can be adhered to. For special dimensional accuracy requirements, please contact our customer service department.
Download area
| Data sheet "Hanno®-PE 33 P" | ||
|---|---|---|
| German version | 737 KB | |
| English version | 746 KB | |
| Certificates "Hanno®-PE 33 P" | ||
Environment
- Based on available data and experience, the product is not a hazardous substance within the meaning of the Hazardous Substances Ordinance and corresponding EC directives. However, we recommend observing the usual care and hygiene when handling chemical substances. Residues can be disposed of with household waste. Local regulations must be observed.
- The product complies with the following directives or fulfills the required restrictions on use: 1907/2006 (REACH), 2011/65 (RoHs2), 2015/863 (RoHs3), 2019/1021 (POP), 517/2014 (greenhouse gases), 2024/590 (depletion of the ozone layer).
| Property | Standard | Value |
|---|---|---|
| Color | - | schwarz |
| Volume weight | DIN EN ISO 845 | 33 kg/m³ ± 5 kg/m³ |
| Tensile strength | DIN EN ISO 1798 | ≥ 0,3 N/mm² |
| Elongation at break | DIN EN ISO 1798 | ≥ 120 % |
| Compression set | DIN EN ISO 1856 | ≤ 25 % (25 %/ 23 °C/ 22h, 0,5h) |
| Temperature resistance | - | -30 °C bis +85 °C |
| Adhesive tensile strength | DIN EN ISO 29862 | > 4 N/cm (Alu) |
| Dimensional tolerance | DIN 7715-5 | P3 |