Hanno®-EL 1
The HANNO product world
Product description
Electrostatic conductive flexible polyurethane foam
Product properties
- Permanently electrostatically conductive
Application areas
- Electronics industry
Processing
Bonding only on dry, grease-free, clean substrates. Press the surface down well. You can easily adjust the material and cut it to size with a sharp knife.
Cleaning
- No significant soiling from the material is to be expected. In the case of self-adhesive parts, adhesive residues can be removed with a petrol-based cleaning agent if necessary. The safety instructions for the cleaning agent used must be observed.
Delivery form
- Sheet goods
- Cuts
- Punched parts (dimensions on request)
- Can be equipped with self-adhesive
Notes
The material tends to change dimensions during processing (punching, cutting, pressing, winding, installation, etc.). In general, the dimensional tolerances of DIN 7715-P3 can be adhered to. For special dimensional accuracy requirements, please contact our customer service department.
Limitations of liability
- Our General Terms and Conditions of Sale with warranty conditions apply, which you can view at www.hanno.com . This information sheet provides non-binding advice without guarantee. The processing instructions given must be adapted to the respective conditions. The user is obliged to check the suitability and application possibilities by carrying out his own tests in order to avoid failures, for which we accept no liability. We reserve the right to make technical changes.
- You can request the latest version of this information sheet at info@hanno.com.
Download area
| Data sheet "Hanno®-EL 1" | ||
|---|---|---|
| German version | 831 KB | |
| English version | 831 KB | |
| Certificates "Hanno®-EL 1" | ||
Environment
- Based on available data and experience, the product is not a hazardous substance within the meaning of the Hazardous Substances Ordinance and corresponding EC directives. However, we recommend observing the usual care and hygiene when handling chemical substances. Residues can be disposed of with household waste. Local regulations must be observed.
| Property | Standard | Value |
|---|---|---|
| Color | - | schwarz |
| Raw density | DIN EN ISO 845 | 20-30 kg/m³ |
| Compression hardness | DIN EN ISO 3386 | ≥ 2,5 kPa (40%) |
| Tensile strength | DIN EN ISO 1798 | ≥ 100 kPa |
| Elongation at break | DIN EN ISO 1798 | ≥ 200% |
| Compression set | DIN EN ISO 1856 | ≤ 10% (24h / 70 °C/ 50%) |
| Temperature resistance | - | -30 °C bis +100 °C (kurzzeitig 130 °C) |
| Surface resistance | IEC 61340-2-3 | < 10⁵ Ohm - elektrostatisch leitfähig |
| Storage stability | - | Bei Raumtemperatur, trocken, praktisch unbegrenzt haltbar; bei selbstklebenden Teilen 12 Monate |