Hanno®-HW 30 sfl
The HANNO product world
Product description
Largely open-cell polyurethane foam based on polyether.
Product properties
- Excellent elasticity behavior
- Hydrolysis-resistant
- Moderate UV resistance
- Insensitive to gasoline vapors and mineral oil splashes
- Excellent sound absorption capacity
Application areas
- Automotive
- Capsule construction
- Mechanical engineering
- Equipment and apparatus engineering
- Commercial vehicles
Processing
Bonding only on dry, grease-free, clean substrates. Press the surface well. The material is easy to punch and cut. You can easily adjust the material and cut it to size with a sharp knife.
Cleaning
- No significant soiling from the material is to be expected. In the case of self-adhesive parts, adhesive residues can be removed with a petrol-based cleaning agent if necessary. The safety instructions for the cleaning agent used must be observed.
Delivery form
- Blockware
- Sheet goods
- Cuts
- Punched parts (dimensions on request)
- Can be equipped with self-adhesive
Notes
The material tends to change dimensions during processing (punching, cutting, pressing, winding, installation, etc.). In general, the dimensional tolerances of DIN 7715-P3 can be adhered to. For special dimensional accuracy requirements, please contact our customer service department.
Download area
| Data sheet "Hanno®-HW 30 sfl" | ||
|---|---|---|
| German version | 676 KB | |
| English version | 678 KB | |
| Certificates "Hanno®-HW 30 sfl" | ||
Environment
- Based on available data and experience, the product is not a hazardous substance within the meaning of the Hazardous Substances Ordinance and corresponding EC directives. However, we recommend observing the usual care and hygiene when handling chemical substances. Residues can be disposed of with household waste. Local regulations must be observed.
- The product complies with the following directives or fulfills the required restrictions on use: 1907/2006 (REACH), 2011/65 (RoHs2), 2015/863 (RoHs3), 2019/1021 (POP), 517/2014 (greenhouse gases), 2024/590 (depletion of the ozone layer).
| Property | Standard | Value |
|---|---|---|
| Color | - | grau |
| Volume weight | DIN EN ISO 845 | 25,5 ± 1,3 kg/m³ |
| Compression hardness | DIN EN ISO 3386 | 3,3 ± 0,5 kPa (bei 40 %) |
| Tensile strength | DIN EN ISO 1798 | ≥ 100 kPa |
| Elongation at break | DIN EN ISO 1798 | ≥ 200 % |
| Compression set | DIN EN ISO 1856 | < 4 % |
| Fire behavior |
DIN 75200 FMVSS 302 ISO 3795 |
< 100 mm/min |
| Temperature resistance | - | -40 °C bis + 100 °C (kurzfristig höher) |