Hanno®-PE 25 N UV
The HANNO product world
Product description
Polyethylene foam, closed cell, coarse cell, not cross-linked.
Product properties
- Hydrolysis-resistant
- UV/weather resistance
- High strength
- Excellent sound absorption capacity
Application areas
- Commercial vehicles
- Damp and wet areas
- Rail vehicle
- Mechanical engineering
- Capsule construction
- Thermal insulation
- Refrigeration technology
Processing
Bonding only on dry, grease-free, clean substrates. Press the surface down well. You can easily adjust the material and cut it to size with a sharp knife.
Cleaning
- No significant soiling from the material is to be expected. In the case of self-adhesive parts, adhesive residues can be removed with a petrol-based cleaning agent if necessary. The safety instructions for the cleaning agent used must be observed.
Delivery form
- Sheet goods
- Cuts
- Punched parts (dimensions on request)
- Can be equipped with self-adhesive
Notes
The material tends to change dimensions during processing (punching, cutting, pressing, winding, installation, etc.). In general, the dimensional tolerances of DIN 7715-P3 can be adhered to. For special dimensional accuracy requirements, please contact our customer service department.
Download area
| Data sheet "Hanno®-PE 25 N UV" | ||
|---|---|---|
| German version | 777 KB | |
| English version | 786 KB | |
| Certificates "Hanno®-PE 25 N UV" | ||
Environment
- Based on available data and experience, the product is not a hazardous substance within the meaning of the Hazardous Substances Ordinance and corresponding EC directives. However, we recommend observing the usual care and hygiene when handling chemical substances. Residues can be disposed of with household waste. Local regulations must be observed.
- The product complies with the following directives or fulfills the required restrictions on use: 1907/2006 (REACH), 2011/65 (RoHs2), 2015/863 (RoHs3), 2019/1021 (POP), 517/2014 (greenhouse gases), 2024/590 (depletion of the ozone layer).
| Property | Standard | Value |
|---|---|---|
| Color | - | anthrazit |
| Raw density | DIN EN ISO 845 | ca. 25 kg/m³ |
| Compression hardness |
DIN EN ISO 3386 DIN EN ISO 3386 DIN EN ISO 7214 DIN EN ISO 7214 |
ca. 3 kPa (bei 25 %) ca. 13 kPa (bei 50 %) ca. 10 kPa (bei 25 %) ca. 24 kPa (bei 50 %) |
| Compression set | DIN EN ISO 1856 | < 20 % (25 %) |
| Cell size | - | < 10 / 25 mm |
| Water absorption | DIN EN 12088 | < 5 % (> 95 % rF, 28 d) |
| Fire behavior |
DIN 75200 FMVSS 302 DIN EN 13501-1 |
≤ 100 mm/min NULL E |
| Temperature resistance | - | -30 °C bis +80 °C |