Hanno®-HW 38 UL
The HANNO product world
Product description
Largely open-cell polyester-based polyurethane foam, flame-retardant.
Product properties
- Excellent elasticity behavior
- Good UV resistance
- Favorable fire behavior (raw foam certified according to UL94)
- Airborne sound absorbing
Application areas
- Automotive
- Mechanical engineering
- Equipment and apparatus engineering
- Electronics industry
Processing
Bonding only on dry, grease-free, clean substrates. Press the surface well. The material is easy to punch and cut. You can easily adjust the material and cut it to size with a sharp knife.
Cleaning
- No significant soiling from the material is to be expected. In the case of self-adhesive parts, adhesive residues can be removed with a petrol-based cleaning agent if necessary. The safety instructions for the cleaning agent used must be observed.
Delivery form
- Blockware
- Sheet goods
- Cuts
- Punched parts (dimensions on request)
- Can be equipped with self-adhesive
Notes
The material tends to change dimensions during processing (punching, cutting, pressing, winding, installation, etc.). In general, the dimensional tolerances of DIN 7715-P3 can be adhered to. For special dimensional accuracy requirements, please contact our customer service department.
Download area
| Data sheet "Hanno®-HW 38 UL" | ||
|---|---|---|
| German version | 683 KB | |
| English version | 684 KB | |
| Certificates "Hanno®-HW 38 UL" | ||
Environment
- Based on available data and experience, the product is not a hazardous substance within the meaning of the Hazardous Substances Ordinance and corresponding EC directives. However, we recommend observing the usual care and hygiene when handling chemical substances. Residues can be disposed of with household waste. Local regulations must be observed.
- The product complies with the following directives or fulfills the required restrictions on use: 1907/2006 (REACH), 2011/65 (RoHs2), 2015/863 (RoHs3), 2019/1021 (POP), 517/2014 (greenhouse gases), 2024/590 (depletion of the ozone layer).
| Property | Standard | Value |
|---|---|---|
| Color | - | anthrazit |
| Raw density | DIN EN ISO 845 | 32 ± 2 kg/m³ |
| Compression hardness | DIN EN ISO 3386 | 3,8 - 5,2 kPa (bei 40 %) |
| Tensile strength | DIN EN ISO 1798 | > 120 kPa |
| Elongation at break | DIN EN ISO 1798 | > 130 % |
| Fire behavior |
FMVSS 302 ISO 3795 UL 94 |
< 100 mm/min NULL HF1 |
| Temperature resistance | - | -40 °C bis +100 °C (kurzzeitig höher) |