Hanno®-CR 130 CR
The HANNO product world
Product description
Closed-cell, soft-elastic cellular rubber based on chloroprene rubber.
Product properties
- Chemical resistance *
Application areas
- Automotive
- Aeronautical engineering
- Sanitary technology
- Ventilation and air conditioning technology
- Electronics industry
Processing
Bonding only on dry, grease-free, clean substrates. Press the surface down well. You can easily adjust the material and cut it to size with a sharp knife.
Cleaning
- No significant soiling from the material is to be expected. In the case of self-adhesive parts, adhesive residues can be removed with a petrol-based cleaning agent if necessary. The safety instructions for the cleaning agent used must be observed.
Delivery form
- Sheet goods
- Stripes
- Punched parts (dimensions on request)
- Cuts
- Can be equipped with self-adhesive
Notes
All materials with a proportion of closed cells tend to shrink to a certain extent during processing and/or under operating conditions. The degree of shrinkage depends on the type of material, density, temperature, exposure time, size of the part and cell size. In general, the dimensional tolerances of DIN 7715-P3 can be adhered to. For special dimensional accuracy requirements, please contact our customer service.
This is a development product for which no complete tests are available. The technical information is based on manufacturer's specifications. Availability is subject to technical testing and feasibility for the desired dimensions. Technical changes are possible in the course of further development work.
Download area
| Data sheet "Hanno®-CR 130 CR" | ||
|---|---|---|
| German version | 703 KB | |
| English version | 713 KB | |
| Certificates "Hanno®-CR 130 CR" | ||
Environment
- Based on available data and experience, the product is not a hazardous substance within the meaning of the Hazardous Substances Ordinance and corresponding EC directives. However, we recommend observing the usual care and hygiene when handling chemical substances. Residues can be disposed of with household waste. Local regulations must be observed.
- The product complies with the following directives or fulfills the required restrictions on use: 1907/2006 (REACH), 2011/65 (RoHs2), 2015/863 (RoHs3), 2019/1021 (POP), 517/2014 (greenhouse gases), 2024/590 (depletion of the ozone layer).
| Property | Standard | Value |
|---|---|---|
| Color | - | schwarz |
| Volume weight | DIN EN ISO 845 | 130 ± 20 kg/m³ |
| Compression hardness |
ASTM D-1056 ASTM D-1056 |
55 ± 15 kPa (25 %) 140 ± 20 kPa (50 %) |
| Compression set |
ASTM D-1056 ASTM D-1056 |
≤ 50 % (23 °C / 22 h / 50 %) ≤ 70 % (40 °C / 22 h / 50 %) |
| Tensile strength | DIN EN ISO 1798 | ≥ 600 kPa |
| Elongation at break | DIN EN ISO 1798 | ≥ 100 % |
| Linear shrinkage | - | ≤ 5 % (3 h, 80 °C, 6,3 mm) |
| Water absorption | ASTM D-1056 | ≤ 5 % |
| Fire behavior |
FMVSS 302 DIN 75200 ISO 3795 UL 94 |
< 100 mm/min * HF1 */** |
| Weather resistance | DIN EN ISO 877 | Rissbildstufe *** |
| Ozone resistance | DIN ISO 1431-1 | Rissbildstufe 0 |
| Temperature resistance | - | -40 °C bis +100 °C |
| Footnote_(*) | - | * Interne Prüfung |
| Footnote_(**) | - | ** in Anlehnung, nicht gelistet nach UL94 |
| Footnote_(***) | - | *** Nicht über einen längeren Zeitraum der direkten Bewitterung aussetzen |
| Medium | Rating |
|---|---|
| Säuren | |
| Schwache Säuren | + |
| Alaun wässrig | + |
| Starke Säuren | -- |
| Salpetersäure | - |
| Schwefelsäure | - |
| Salzsäure | - |
| Alkohole | |
| Glyzerin | + |
| Etylalkohol | + |
| Methylalkohol | -- |
| Glykol | + |
| Kohlenwasserstoffe | -- |
| Vaseline | -- |
| Sonstige Chemikalien | |
| Frostschutzmittel | + |
| Kohlensäure | + |
| Ozon | + |
| Silikonöl und -fett | + |
| Chlor | - |
| Wasser | + |
| Heißdampf | - |
| Lösungsmittel | - |
| Waschmittel | + |
| Laugen | |
| Schwache Laugen | + |
| Ammoniak | + |
| Starke Laugen | -- |
| Kohlenwasserstoffe | |
| Kraftstoffe | -- |
| Heizöl | -- |
| Hydraulikflüssigkeiten | -- |
| Andere Lösungsmittel | |
| Nitro Verdünnung | - |