Hanno®-CR 130 EPDM-H
The HANNO product world
Product description
Closed-cell, soft-elastic cellular rubber based on EPDM rubber with particularly good resistance to weathering and ozone.
Product properties
- High strength
- Very good chemical resistance
Application areas
- Automotive
- Aeronautical engineering
- Sanitary technology
- Ventilation and air conditioning technology
Processing
Bonding only on dry, grease-free, clean substrates. Press the surface well. The material is easy to punch and cut. You can easily adjust the material and cut it to size with a sharp knife.
Cleaning
- No significant soiling from the material is to be expected. In the case of self-adhesive parts, adhesive residues can be removed with a petrol-based cleaning agent if necessary. The safety instructions for the cleaning agent used must be observed.
Delivery form
- Sheet goods
- Stripes
- Punched parts (dimensions on request)
- Cuts
- Can be equipped with self-adhesive
Notes
All materials with a proportion of closed cells tend to shrink to a certain extent during processing and/or under operating conditions. The degree of shrinkage depends on the type of material, density, temperature, exposure time, size of the part and cell size. In general, the dimensional tolerances of DIN 7715-P3 can be adhered to. For special dimensional accuracy requirements, please contact our customer service.
Environment
- Based on available data and experience, the product is not a hazardous substance within the meaning of the Hazardous Substances Ordinance and corresponding EC directives. However, we recommend observing the usual care and hygiene when handling chemical substances. Residues can be disposed of with household waste. Local regulations must be observed.
- The product complies with the following directives or fulfills the required restrictions on use: 1907/2006 (REACH), 2011/65 (RoHs2), 2015/863 (RoHs3), 2019/1021 (POP), 517/2014 (greenhouse gases), 2024/590 (depletion of the ozone layer).
| Property | Standard | Value |
|---|---|---|
| Color | - | schwarz |
| Volume weight | DIN EN ISO 845 | 130 ± 20 kg/m³ |
| Compression hardness |
ASTM D-1056 ASTM D-1056 |
70 ± 20 kPa (25 %) 160 ± 40 kPa (50 %) |
| Compression set |
ASTM D-1056 ASTM D-1056 |
≤ 65 % (23 °C/ 22 Std/ 50 %) ≤ 80 % (40 °C/ 22 Std/ 50 %) |
| Tensile strength | DIN EN ISO 1798 | ≥ 400 kPa |
| Elongation at break | DIN EN ISO 1798 | ≥ 100 % |
| Linear shrinkage | - | ≤ 5 % (3 h, 80 °C, 6,3 mm) |
| Water absorption | ASTM D-1056 | ≤ 7 % |
| Fire behavior |
FMVSS 302 DIN 75200 ISO 3795 |
< 100 mm/min ab 5 mm |
| Weather resistance | DIN EN ISO 877 | sehr gut |
| Ozone resistance | DIN ISO 1431-1 | Rissbildstufe 0 |
| Shore hardness | DIN EN ISO 868 | 55 ± 10 |
| Temperature resistance | - | -40 °C bis +100 °C |
| Medium | Rating |
|---|---|
| Laugen | |
| Schwache Laugen | + |
| Schwache Laugen | + |
| Ammoniak | + |
| Laugen in stärkerer Konzentration | +/- |
| Säuren | |
| Alaun wässrig | + |
| Säuren in stärkerer Konzentration | +/- |
| Salpetersäure | - |
| Schwefelsäure | - |
| Salzsäure | +/- |
| Alkohole | |
| Etylalkohol | + |
| Methylalkohol | + |
| Glyzerin | + |
| Glykol | + |
| Kohlenwasserstoffe | |
| Kraftstoffe | - |
| Heizöl | - |
| Testbenzin | - |
| Bremsflüssigkeit | + |
| Fette | |
| Öl | - |
| Fett | - |
| Andere Lösungsmittel | |
| Nitro Verdünnung | - |
| Sonstige Chemikalien | |
| Lösungsmittel | - |
| Waschmittel | + |
| Frostschutzmittel | + |
| Kohlensäure | + |
| Ozon | + |
| Silikonöl und -fett | + |
| Chlorgase | +/- |
| Wasser | + |
| Wasserdampf | + |
| Meerwasser | + |
| Kohlensäure | + |
| Fotochemikalien | + |
| Chlorkalk (wässrig) | + |